ABOUT ME

I live in a camper van with a West Highland Terrier for company.
My passion is creating images but it is a work in progress.
I am always willing to share what knowledge I have and can be contacted through the comments on this post or e-mail ADRIAN
ALL IMAGES WILL ENLARGE WITH A LEFT CLICK

Monday, 13 July 2020

I FOUND SOMETHING NEW.

This is a short post showing a nifty trick in FreeCAD. It made my day when I discovered it.

After a drizzly day the sun is now shining and I really ought to go out mowing but tomorrow is forecast fine so I'll do it in the morning.
Have fun.
Posted by at

5 comments:

  1. Rachel Phillips13 July 2020 at 19:55

    Good dry day here today for harvest to start in the Winter barley

    ReplyDelete
    Replies
    1. Adrian Ward13 July 2020 at 20:41

      Rachel, we didn't drill any winter barley this year or last year but lower down I see it is a good week or more away. Depending on the weather the spring barley is about a month or more away at best but it is looking good.

      Delete
  2. Adrian Ward13 July 2020 at 20:42

    Thanks Agnie.

    ReplyDelete
  3. Midmarsh John13 July 2020 at 21:26

    Very nifty. I assume 'degrees of freedom' refers to parts which haven't been adjusted yet?

    ReplyDelete
    Replies
    1. Adrian Ward14 July 2020 at 04:02

      John, yes all lines have to be defined or constrained with a dimension and position. I am not good at CAD but prefer using Sketches as opposed to Primitives. I would normally constrain bits as I draw them but did it this way to show the clever Polyline feature.

      Delete

Subscribe to: Post Comments (Atom)